Bed part

The bed part is a bending and welding structure, which is the carrier of other parts.

Main drive part

The main drive part is composed of three parts: spindle, sprocket, chain and cylinder, which can realize bending and return action.

Clamping part

The clamping structure is used to clamp the pipe and rotate with the spindle so that the abrasive tool and the pipe fitting rotate at the same time.

Guide part

The guide mechanism supports the straight part of the pipe during the bending process, and the pipe moves forward with the guide mold during the bending process. The clamping action of the clamping guide structure is driven by the hydraulic cylinder, and the peephole cover plate on the side can be opened for inspection, maintenance and adjustment.

Mandrel mechanism

Mandre mechanism is located at the back of the bed, through the screw drive, the required bending radius of the mandrel can be adjusted. The mandrel action is realized by the mandrel and the oil cylinder, and the lead of the mandrel can be adjusted by adjusting the nut. The mandrel support device, supporting mandrel and pipe fittings are installed on the bed.

Hydraulic system

The hydraulic system control components are imported from Taiwan brand, the hydraulic system adopts integrated channel block structure, the hydraulic pipeline adopts seamless steel pipe, and the high pressure hose is used at the active connection. The "U" shaped quick fitting joint eliminates the system leakage phenomenon and improves the reliability of the hydraulic system.

Electrical system

Electrical system field 50HZ, 380V three-phase AC power supply, control line route 380/110V control transformer power supply, used to control the contactor, intermediate relay and solenoid valve work, the main electrical components selected imported brands, the power line is mainly driven by a Y series three-phase asynchronous motor hydraulic system. The main control components are controlled by Japanese Mitsubishi PIC program, and all the control button signals come from the safety cabinet.

Mold part

The mold of the machine is composed of bending die, moving jaws, pressure die, core, etc., and anti-wrinkle plate and soft core head can also be added according to the needs of users and actual pipe bending to improve the bending quality of the pipe.

Feed part

Japan Mitsubishi servo drive, servo motor push car feed accurate, feed curve amplitude accurate Angle, feed shaft automatic detection, to avoid collision with the machine.

Corner part

Mitsubishi servo drive, servo motor, automatic Angle detection, clamping stability, to ensure safety.

The machine is equipped with safety limit and emergency stop button to ensure the safety of the operator.