Standard display text: Chinese/English switch. (Other text can be changed as required)

Maximum bending program memory capacity of 500 groups, each group can be programmed up to 16 bends. (Expandable)

Directly input the bending processing parameters, the machine can be executed in a single step during automatic operation, can be suspended, so that the bending of special pipe can be manually intervened, but also can resume automatic operation. At the same time, it has the pause function, with automatic and manual functions, and starts with the switch when running the next cycle after one cycle, and uses the emergency stop button when you need to stop.

Operating program and bending program memory storage time is unlimited, will not be caused by power failure or long-term non-use caused by program loss.

While the machine performs automatic processing, the controller can still input or edit programs.

With XYZ socket value to YBC processing value conversion function, convenient for operators to use.

The bending program can set a total of ten speed of 0-9 action of each shaft in each processing step, so as to flexibly use for different working objects and improve work efficiency. An external speed knob is also provided to reduce or increase the processing speed at any time as required.

Automatic with pull back feed and reciprocating feed function for switching to meet different pipe processing needs.

Equipped with processing quantity and processing time counting function.

Absolute origin system, restart every morning or after rest, without complicated procedures to find the origin of each axis can immediately enter the work standby state.

The screen synchronously displays the position and bending Angle of each action shaft of the machine.

The control program has a text display function of automatic error detection and countermeasures, and the information of machine failure or illogical operation is directly displayed on the screen, with repair methods to prevent human operation errors from damaging the machine and relatively reduce the difficulty of maintenance. The above automatic detection of different alarm message records can be automatically stored for future maintenance reference.

Automatic or manual mode setting function according to the different nature of the work, set a variety of different working modes such as with or without core, auxiliary push and other different states, improve production efficiency.

With multiple delay parameter Settings, the most appropriate time difference can be set for each action shaft to meet the needs of various bending changes.

With the automatic detection function of each button and circuit output/input board, it can easily find the possible fault location.

The machine has automatic lubrication system to protect the machine transmission parts and improve the service life of the machine.

Closed-loop control is adopted.